TrustSeal Verified

Power Hacksaw Machines

Horizontal Swing Type Bandsaw

Horizontal Swing Type Bandsaw
We offer Horizontal Swing Type Bandsaw (B250 HDHL DA) to our clients that is known for its superior performance. Supreme efficiency and long term durability are blended in this bandsaw machine. Our bandsaw machines are highly appreciable because of their durability and unparalleled service. Further, this bandsaw features:

  • Heavy Duty, High Speed
  • High Productivity
  • Large Cross Section of Swing Frame
  • Integral Front & Rear Bed Design

Power Hacksaw / Bandsaw Machines

Power Hacksaw / Bandsaw Machines
The range of Power Hacksaw/ Bandsaw Machines manufactured by us are extensively used for various purposes such cutting of metals and other materials. All these machines are widely appreciated for swift & smooth functionality, fine cutting, trouble free operations and high efficiency. We customize these machines are per the client's specifications.

Our range of Power Hacksaw/Bandsaw Machines includes:
  • Hacksaw Machines
  • Horizontal Swing Type Bandsaw (B250 HDHL DA)
  • Double Column Bandsaw Machine

We are the manufacturer and exporter of Power Hacksaw / Bandsaw Machines.

Hacksaw Machines

Hacksaw Machines
We offer superior quality Hacksaw Machines to our clients. These machines are precision engineered so as to meet the modern demands of several industries. Due to their smooth & swift functioning ability they are able to operate in a spontaneous way which aids the worker in consistently carrying his work with ultimate efficiency. Some of the specifications of this hacksaw machine are following:

Bed: The bed is available as a single piece casting. It has wide rigid casting for the collection of coolant, swarf and also houses the V-belt device.

Saw Frame: The rigid saw frame ensures a square & parallel cut & the cut takes place on the backward pull stroke. To prevent the wear of the blade, it is hydraulically lifted out of contact with work place on the forward stroke up.

The Drive: The drive is attached through V-Pulleys with provision to adjust the complete tension of the V-Belts. The shafts are fitted with ball bearings and taper and ball bearings to eliminate friction.

Speed: Specific speeds has been provided for different kind of metals in order to make it suitable. High speed for metals like mild steel, brass, copper etc. and low speed for cast iron.

Feed Saw: Two levers are provided to hydraulically control the Feed Saw at the dash-pot. One controls the rate of feed and the other enables the bow slide to be raised or lowered and after the completion of the cut, the motor gets automatically switched off.

Vice: The vice is rigid construction. It has two jaws, one jaw remains fixed and the other is adjusted according to the size of the material to be cut.

Coolant: A coolant tank is enclosed within the base of machines with constant speed to supply continuous cooling to the saw blade.

Electrical: A Push button starter is fitted with an adjustable trip mechanism that helps in stopping the machine soon when the blade is clear from the work at extra cost.

Double Column Bandsaw Machine

Double Column Bandsaw Machine
Technical Specifications
Model 210 300 525 650 800 1000 1250 1500
Cutting Cap. In mm Round Square 210 × 210 300 × 300 525 × 525 650 × 650 800 × 800 1000 × 1000 1250 × 1250 1500 × 1500
Blade Size (in mm) 3505 × 27 4100 × 34 5800 × 41 8000 × 67 8800 × 67 12300 × 67 or 80 13100 × 67 or 80 16100 × 80
Saw Motor (in mm) 3 5 10 15 20 20 25 25 or 30
Hyd. Motors 1 HP 1.5 HP 2 HP 2 HP 2 HP 2 HP 3 HP 3 HP
Coolant Motors 0.16 0.16 0.25 0.25 0.25 0.25 0.25 0.25
Chip Conveyor Motor HP 0.25 0.25 0.25 0.25 0.25 0.33 0.33 0.33
Over Dimensions For DBCSA Model
Length 1900 2600 3200 4100 4100 6200 6700 7500
Width 950 1200 1250 1800 1850 2700 3000 3000
Height 1450 1650 1700 2400 2400 3500 4000 4000
Cutting Speed (m/min) 20 to 100 mtr/min in steps std. Supply suitable for cutting all types metals ranging of hardness BHN 70 to 350
Power Supply 440 V + 10% 50 Hz. 3 Phase, AC Supply Control Circuit with 220 V Standard Supply
ACCURACY & OUT PHASE 100mm 0 ± 0.1mm


Benefits of Machine :
  • Vibration less operation for better accuracy
  • Replacement of component / part is easy
  • Precision work can be done
  • Accurate technical feature
  • User's friendly machine
  • Maintenance cost is very less
  • Machine life is very high

Optional Features :
  • Bundle cutting attachment
  • Conveyor table for mass production
  • Provisional for conversion of semiautomatic to Automatic machine features

X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Power Hacksaw Machines ?

    country-ico

    We will contact you soon !

    Sahil Aggarwal

    (Manager)

    Simplex Engg. Works

    Bhandari Gate, Batala, Punjab, India

    More Categories

    View All Categories »
    Send SMS
    Get Callback